HeatShield Chimney Liner & Rebuild Nationwide

HeatShield Chimney Liner & Rebuild in Boston: What to Know First

A HeatShield liner rebuild in Boston typically runs $2,800 to $7,400 depending on whether we’re resurfacing a single flue or tearing out and relining a full multi-story chase. We’re an independent HeatShield service provider, not a manufacturer-authorized shop, which means we fix what the camera shows us without a corporate script steering the call. Most HeatShield jobs take one to two days on site, with the written price, written scope, and written warranty in your hand before anyone touches a wrench.

Call (857) 567-8887

If you own a home in Boston with a HeatShield liner system and you’re seeing flaking, spalling, or water staining around the fireplace, this page is for you. Call (857) 567-8887 and we’ll schedule a camera-scan inspection, give you the written price, and let you decide. No phone estimates, no surprises.

How HeatShield Products Fail - and How We Fix Them

HeatShield systems don’t fail like generic terra cotta liners. They fail at the joints, the crown interface, and the resurfacing layer. Here’s what we actually see on Boston rooftops:

• HeatShield Cerfractory flaking at the smoke chamber. The Cerfractory resurfacing compound (HeatShield’s ceramic refractory material) can delaminate where the smoke chamber meets the first flue tile. We find hairline separation on the back wall of the smoke chamber that the camera catches before it becomes a draft problem. Fix: strip the loose material, re-key the surface, and apply a fresh Cerfractory bond coat, then document the entire repair on camera.
• Joint erosion on HeatShield’s Joint Repair System. HeatShield’s joint repair system uses a specialized sealant and foam applicator to fill gaps between clay tiles. In Boston’s freeze-thaw cycles, the sealant can shrink at the crown line, letting water run down the gap between the liner and the chimney structure. Fix: remove the failed sealant, re-apply with the HeatShield joint foam system, and cap the crown with a flexible crown coat so water stops entering at the top.
• Crown separation at the flue exit. HeatShield-coated flues often outlast the original mortar crown. When the crown cracks, the liner coating keeps smoke and gases moving, but water sneaks along the outside. We routinely see this on older triple-deckers in Dorchester, where freeze-thaw cycles have been working on the same crown for forty years. Fix: strip the damaged crown, pour a new crown with proper drip edge, and verify the HeatShield coating is still intact below.
• Corrosion at the damper assembly. HeatShield resurfacing extends the life of the liner, but it doesn’t protect the metal damper frame below. When the damper rusts through, it can block the flue or fall into the firebox. Fix: remove the old damper, install a top-sealing damper at the flue exit, and verify the HeatShield coating is clean and unobstructed.
• Incomplete original application. We still find liners where the original HeatShield installer skipped the smoke chamber or stopped short of the crown. A camera scan tells you in five minutes what happened. Fix: complete the system the way it should have been done, and we photograph every stage.

Our HeatShield Chimney Liner & Rebuild Process

Here’s exactly how a HeatShield rebuild goes at Level Two Chimney Boston:

1. 1
   Call and schedule. You reach a live person at (857) 567-8887, any hour. We set a time that works, and we text when our tech is on the way.
2. 2
   Camera-scan inspection (NFPA 211 Level 2). We run the camera down the flue and record everything. You see the footage. We name what we found: flaking Cerfractory, failed joint sealant, cracked crown. No flashlight act.
3. 3
   Written price and scope. Before any work starts, you get a written price, written scope of work, and written warranty. Clause 1 of the Haven Standard: have it in writing. If we can safely repair the HeatShield liner, we’ll say so. If it needs a full rebuild, you’ll see why in the footage.
4. 4
   Parts decision. We use HeatShield’s Cerfractory compound and joint system where the warranty and application call for it. For related hardware (caps, dampers, crowns), we may use DuraFlex or Gelco components when they’re the better-quality or better-priced option. You’ll know what we’re using and why, in writing.
5. 5
   Repair or rebuild. We strip, prep, apply, cure, and test. Every step is documented. We don’t skip the smoke chamber. We don’t cut the coating short at the crown. The camera comes back down at the end.
6. 6
   Documented photo record. You walk away with a photo archive of the completed work, under Clause 4 of the Haven Standard. That’s been our default since 2009. It protects you, and it protects us.

Before

After

What HeatShield Chimney Liner & Rebuild Costs in Boston

Here’s what we actually charge for HeatShield work in Boston. Prices are written, not phoned in:

• HeatShield Cerfractory resurfacing, single flue: $2,800 to $4,200 depending on flue height and smoke chamber condition.
• HeatShield joint repair system (multiple joints): $1,500 to $3,000 depending on how many joints have failed.
• HeatShield liner + full crown rebuild: $3,500 to $5,500, including new crown with drip edge.
• Full HeatShield liner replacement with DuraFlex or Gelco stainless liner: $5,200 to $7,400 for typical Boston two- or three-story flues.

What moves the price: flue height, roof pitch (Boston roofs are steep, and that makes scaffold and ladder work slower), how much of the old coating has to be stripped before we can re-apply, and whether the crown needs full replacement. Every quote is a written price. Bring us a competitor’s written estimate and we’ll give you a free second opinion. Call (857) 567-8887 for scheduling.

Why Boston Homeowners Call Level Two Chimney Boston for HeatShield Work

Because we name the problem, give you the measurement or condition, and state the cost before moving to anything else. The camera doesn’t guess. Neither do we.

We’ve inspected and cleaned more than 38,000 chimneys since 2009, every single one with a written price before work started and a documented record when it was done. That archive practice became Clause 4 of the Haven Standard, and it’s been running continuously for sixteen years. Our techs are background-checked and uniformed, with license information on every page. Every job is backed by our 365-Day Done Right Promise: if it’s not done right, we make it right.

Corrine Halstead, our owner, learned flue measurement, liner assessment, and draft diagnostics at BOCES Rockland in New York before building her crew’s reputation across Greater Boston, including years of sweep and inspection work on the older triple-deckers along Dorchester Avenue. She’s the one who hands you a written scope and a firm price before any work begins, no phone-call estimates, no surprises on the invoice. We’re independently owned and operated, and we service HeatShield, DuraFlex, and Gelco systems in Boston and nearby areas.

FAQs